ENDURO-GRIP
Category: Incline / Decline (ID)
Product Number: # ID07
ENDURO-GRIP
Category: Incline / Decline (ID)
Product Number: # ID07
Product Number
# ID07
Color:
Blue
Number Of Plies:
3
Product Compound:
Carboxylated Nitrile
Top Surface:
Rough-Top .094"
Bottom Surface:
Friction
Working Tension (PIW):
90
Weight In Pounds (PIW per Foot):
0.141
Minimum Pulley Diamter (In Inches):
3.500
Minimum Temperature (In ˚F):
0.0
Maximum Temperature (In ˚F):
250
Meets FDA Requirements:
No
Clipper ®:
2
Staple:
125
Nominal Thickness (In Inches):
.313
Fabric:
Polyester Multifilament
Resistance to Oils and Fats:
Good
Official Approval USDA:
No
Alligator ®:
7
Note: All recommendations for lacing assume that Rough-Top cover under lace is removed down to the carcass.
Minimum pulley recommendations are based on 180° arc of contact
++If vulcanized endless - if lace 1" (belt speed less that 100 FPM)
+++below 30°F use 5" minimum pulley
**35-ounce Bare-Duck Top Ply
®Registered Flexible Steel Lacing
SS - Stainless Steel
Ex - Excellent
* 15-ounce Bare-Duck Top Ply
®Registered E. I. duPont
®Registered Clipper Belt Lacer
