Pulleys

Drum Pulleys

  • 14" to 36" diameters standard (additional sizes available upon request)
  • Standard face lengths up to 72"
  • Available in crowned or flat face
  • Pulleys meet or exceed CEMA standards
  • XT®, QD® and other hubs/bushings available
  • Stock in Michigan
  • Mine Duty construction available on request
  • Spiral Drums available
  • Various lagging compounds available
  • Stainless Steel construction available on request

Wing Pulleys

  • Self-cleaning design helps reduce or eliminate material buildup on the pulley and belt
  • 4" to 36" diameters standard (additional sizes available upon request)
  • Standard face lengths to 72" standard
  • Available crowned or flat face
  • Pulleys meet or exceed CEMA standards
  • XT®, QD® and other hubs/bushings available
  • Stock in Michigan
  • Mine Duty construction available on request
  • Stainless Steel construction available on request
  • Spiral Wing Pulleys available
  • Wing Tip Lagging available

Stainless Steel Pulleys

  • Class I - Sanitary Class

    Manufactured to strict finish requirements on all surfaces (32 RA or better) including weld fillets, there are no imperfections on any of the surfaces for bacteria to collect. This class of pulleys was designed to be used in food industry applications where FDA and USDA requirements for sanitary components are the most stringent. Available in standard Type-1 (welded axle) construction only. The construction and finish tolerances of this class of pulley make it the most expensive of the classes.

    • Designed for direct food contact zone applications
    • Flush-end plate construction
    • Sanitary Class
    • Designed for direct food contact zone applications
    • Flush-end plate construction
    • Fabricated from 304 stainless steel
    • All surfaces have a finish of 32 RA or better
    • Available in diameters of 2" - 8"
    • Lengths up to 48" - maximum lengths depend on diameter selected
    • Available in Type 1 hub construction only
    • Can be supplied with vulcanized food grade lagging
  • Class II - Non-Food Contact/Washdown Applications

    Finish requirements are less stringent in this class making it less expensive than Class-1 construction. All welds are ground, and all surfaces are media treated for a consistent finish appearance. Surfaces may have slight imperfections, including pits, scratches, and small pockets. Flush endplate construction minimizes the possibility of material build-up. Designed for use on conveyors where sanitary requirements are less stringent, or where product is already packaged. Available in most standard hub styles. Diameters 2" - 12".

    • Designed for non-food contact zone washdown applications
    • Flush-end plate construction
    • Washdown/corrosion resistant class
    • Designed for non-food contact zone washdown applications
    • Flush-end plate construction
    • Fabricated from 304 stainless steel
    • Standard mill finish, media treated on all surfaces
    • Welds are ground and media treated
    • Available in Type-1, Type-2 and Type-3 hub styles
    • Can be supplied with stainless steel or carbon steel bearings. Please specify when ordering.
    • Available in a wide variety of vulcanized rubber compounds
  • Class III - Washdown/Corrosion Resistant Class

    All surfaces are media treated for a consistent finish appearance. Surfaces may have slight imperfections, such as pits, scratches, or small pockets. Designed for conveyor applications where sanitary requirements are not a concern. Ideal for applications that require a corrosion resistant pulley made from stainless steel. Class-3 pulleys are the least expensive of the stainless steel pulley offerings from PCI. Available in all standard hub styles. Diameters 2" - 12".

    • Used where corrosion resistance is required
    • Recessed end-plate construction
    • Washdown/corrosion resistant class
    • Used in applications where corrosion resistance is required
    • Recessed end-plate construction
    • Fabricated from 304 stainless steel
    • Standard mill finish, media treated on all surfaces
    • Welds are in "as welded" condition
    • Available in Type-1, Type-2, Type-3 or compression hub styles
    • Can be supplied with stainless steel or carbon steel bearings. Please specify when ordering.
    • Available in a wide variety of vulcanized rubber compounds

Package Handling Pulleys

  • "FC" Series
    • Stock in Michigan
    • Trapezoidal crown or flat face construction available
    • Gauge tubing construction with 1/4" end disks
    • 2" to 12" diameters
    • Multiple hub options available
    • V-Groove styles available
    • Various lagging compounds available
  • "MC" Series
    • Trapezoidal crown or flat face construction available
    • Heavy wall tube construction with 3/8" end disks
    • 2" to 12 3/4" diameters
    • Multiple hub options available
    • Various lagging compounds available
    • V-Groove options available

Deflection Wheels

  • PCI manufactures deflection wheels for use with corrugated side wall belting on “Boxwall” conveyors.
  • Made-to-order deflection wheels are available in a wide variety of sizes and hub combinations.

Take-Up Frames and Covers

  • Take-Up Frames are available in WIDE SLOT and NARROW SLOT styles
  • Capable of mounting inside, outside, or as part of the conveyor frame
  • Take-Up Covers fit standard PCI wide slot and narrow slot take-up frames
  • Covers rotating shafts, pulleys and other moving components(i.e. chains, sprockets, belts, etc.)
  • Take-Up can be adjusted with cover in place.
  • Popular sizes in stock for immediate shipment.

Accessories

  • Axles
  • Hubs and Bushings
  • Lagging